Lithium Silicate Densifier for Concrete

• Understand the product: Familiarize yourself with the properties and characteristics of the specific Lithium Silicate Densifier.
• Surface preparation: Ensure the concrete surface is clean and free from contaminants before application.
• Apply according to guidelines: Follow manufacturer instructions for application method, dosage, and frequency.
• Consider environmental conditions: Take into account temperature, humidity, and drying conditions during application and curing.
• Wear appropriate PPE: Use gloves, safety goggles, and respiratory protection as recommended.
• Document and monitor results: Keep records of application details and monitor performance over time.
• Collaborate with manufacturers: Seek technical support and guidance from manufacturers and suppliers.

• Understand the product: Familiarize yourself with the specific Lithium Silicate Densifier you’ll be using.
• Communication with engineers/designers: Collaborate closely with project stakeholders for proper application.
• Surface preparation: Ensure a clean and contaminant-free concrete surface before application.
• Adhere to manufacturer guidelines: Follow instructions on application methods, dosage rates, and curing times.
• Schedule and coordination: Plan application to align with the project schedule and coordinate with other trades.
• Safety measures: Prioritize safety by providing ventilation and using appropriate PPE.
• Documentation and reporting: Maintain detailed records of application details for reference.
• Training and education: Ensure contractors are trained in proper handling and application techniques.

Preparation of the substrate:

• Ensure the surface is clean and free from contamination, oil, applied components, or foreign materials.
• Identify and repair any cracks, filling them with grout if necessary.
• Restore the final surface finish.
• Wash the surface and remove excess water.
• Allow the surface to dry and withstand traffic load without damaging the concrete.

Mixing:

• LSD™ Concrete Surface Hardener is ready-to-use, so gently stir before application.
  Installation:
• Apply LSD™ concrete hardener by spraying or using a roller/brush on the desired surface.
• Work until the hardener starts to gel or become sticky, then moisten the surface and continue working for another 10 to 15 minutes.
• Once the surface gels or becomes slippery, rinse with water and dry. Repeat this process after 30 minutes.
• Ensure the hardener is properly immersed in the concrete.
• Apply additional layers if the surface is absorbent.

Cleaning:

•  Clean brushes, tools, and equipment, and spray with washable water immediately after use.

Safety:

• Adhere to standard precautions for chemical products during transportation.
• Avoid eating or smoking while working and wash your hands after work or during breaks.
• Use a protective mask to guard against airborne particles.
• Wear gloves to prevent skin inflammation and safety glasses to protect the eyes.
• Use clothing, gloves, and glasses resistant to chemical environments.
• In areas with poor ventilation, use a suitable breathing apparatus.

• Familiarize with Specifications: Understand project requirements and specifications for the densifier.
• Pre-Application Inspection: Assess the condition of the concrete substrate before application.
• Adherence to Manufacturer Guidelines: Follow instructions for application method, dosage rates, and curing times.
• Uniform Coverage: Ensure even application of the densifier across the surface.
• Penetration Assessment: Monitor and evaluate the depth of densifier penetration into the concrete.
• Drying and Curing: Follow recommended drying and curing times while controlling environmental conditions.
• Performance Testing: Conduct tests to verify densifier effectiveness against specified requirements.
• Documentation: Maintain detailed records of application details and test results.
• Communication with Stakeholders: Collaborate with project stakeholders and keep them informed.
• Continuous Monitoring: Regularly assess densifier performance and address any issues that arise.